Newsroom - steel casting, slag pot, press frame ,grinding roller, girth gear-Great Wall Steel Casting Company

Newsroom

CHAENG is the excellent foundry of vertical mill grinding roller

2019-05-21

As an important part of the vertical mill, the grinding roller will suffer from the damage of the grinding roller during the operation of the vertical mill This also means that no matter how important the accessories are, there is a certain service life The customer chooses the g
How to choose a good quality kiln type? CHANEG gives you the choice

2019-05-17

The kiln type is a circular large steel ring, installed in the outer ring of the rotary kiln, The function of the kiln type is to transfer the entire gravity of the cylinder to the kiln supporting wheel, and to enable the cylinder to smoothly rotate on the supporting wheel The ki
The main role of heat treatment in the large girth gear of rotary kiln

2019-05-15

The large girth gear is a key component on the rotary kiln It requires good comprehensive mechanical properties and tooth surface wear resistance to ensure stable operation of the rotary kiln When the metallurgical factors such as smelting and pouring are determined, the metallographi
How to choose the foundry of the vertical mill grinding table?

2019-05-13

The vertical grinding table is one of the core components of the vertical mill, and the market demand is also growing Vertical mills have been adopted by more and more cement companies because of their obvious energy-saving advantages Faced with huge market demand, all kinds of foundry manufacturers have sprung up Among the many foundry manufacturers, which one is the best?
Precautions for steel plant slag pot when tipping over

2019-05-09

The steel plant should be self-locking in the operation of the slag pot tipping device, and the tilting angle of the tilting slag pot needs to be less than 116 degrees When pouring the slag, it is necessary to select the topography to prevent accidental injury to the slag shell when the slag is poured
Analysis of the function of the rotary kiln supporting roller adjusting device

2019-05-07

The rotary kiln supporting roller is used to carry the weight of the entire rotating part and the orientation of the cylinder It can ensure that the cylinder and the rolling ring can work normally and smoothly on the supporting roller, so the production of the supporting roller ne
Special maintenance method for ball mill large girth gear

2019-05-05

The most used equipment in the metallurgical industry, building materials industry, chemical industry, etc is the rotary kiln, and the key component in the rotary kiln transmission is the large girth gear, which is connected by a pair of screws used by the two half gears Then, it
Happy news：Nine pieces of slag pot successfully sent out to the United States

2019-04-28

On April 17-21, nine slag pots produced by CHAENG passed the acceptance test and were sent to Tianjin Port for delivery to US customers In the development of the past ten years, CHAENG has been insisting on continuous innovation and learning In-depth optimization of the material and

34

PRODUCTS

CONTACT

Tel: +8615290747879
Whatsapp: +8615290747879
E-mail: casting@chaeng.co
Skype : GreatWall1958

casting@chaeng.co +8615290747879