1. The safety factor of the slag pot trunnion should be not less than 8, and it can be used only after passing the heavy load test with 1.25 times load.

2. For the slag pots in usage, the trunnion should be tested for flaw detection regularly. If the trunnion has internal cracks, obvious deformation, the wear greater than 10% of the diameter, mechanical failure and other damages, the slag pot should be repaired or scrapped.

3. The slag pot should be inspected before use. There should be no water or wet materials in the pot.

4. When lifting the slag pot containing liquid slag, keep a clearance distance of more than 1.5m with neighboring equipment or buildings and structures.

5. The slag pot trunnion and the crane plate hook should be kept lubricated, and the grease should be applied at least once per shift.

6. It is forbidden to hit or beat on the slag pot body and trunnion with heavy hammer or other heavy objects. Each shift should check the online slag pots.

7. Check whether the turning mechanism is deformed, and whether each pin is complete; the workshop organizes a comprehensive inspection of the slag pot body and the trunnion once a month, and asks professionals to do flaw detection on trunnion once a year.

CHAENG has 11 years of experience in slag pot manufacturing, using internationally advanced production equipment and technology, and its slag pots have been successfully sold to more than 50 countries and regions such as the United States, Mexico, Brazil, India, South Korea, Japan, and Russia. It has been proved by practice that under the proper use environment, the average using time of the slag pots produced by CHAENG can reach about 6,000 times. If you are interested, we would like to welcome your consultation!